|
Custom-CWM LCR 7
B&W Speakers
> Inwall
> Custom-CWM LCR 7
Opis
The CWMLCR7 is a three-way in-wall speaker that offers the audio quality of a high-quality stand-alone model.
It features three 100mm (4in) mica cone bass drivers, a 100mm (4in) woven Kevlar cone midrange driver and a Nautilus tube-loaded 25mm (1in) aluminium dome tweeter. The mica bass drivers provide the low frequency snap characteristic of any really good loudspeaker.
| Technical features | Nautilus™ tube-loaded tweeter | |
| Woven Kevlar® cone midrange | ||
| Paper/mica cone bass | ||
| Description | 3-way in-wall speaker system | |
| Drive units | 1x o25mm (1 in) Nautilus™ tube-loaded tweeter | |
| 1x o100mm (4.0 in) woven Kevlar® cone midrange | ||
| 3x o100mm (4.0 in) paper/mica cone bass | ||
| Frequency range | -6dB at 54Hz and 30kHz | |
| Frequency response | 65Hz-30kHz ±3dB on reference axis | |
| Sensitivity | 85 dB spl (2.83V, 1m) | |
| Impedance Nominal | 8Ω (minimum 3.8Ω) | |
| Crossover frequency | 3.2kHz | |
| Recommended amplifier power | 20W - 150W continuous into 8Ω on unclipped programme | |
| Frame size | 625mm (24.6 in) x 175mm (6.9 in) | |
| Cut-out size | 600mm (23.6 in) x 150mm (5.9 in) | |
| Min depth req | 101mm (3.9 in) from wall surface | |
| Net weight | 4.2kg (9.3lb) | |
| Finish | Semi-matt white suitable for customising or pre-painting (paint mask included) | |
| Accessories | Pre-mount kit for new construction (PMK C65) | |
| Back Box (BB LCR7) |