|
In-wall-SA250 Mk2
B&W Speakers
> Inwall
> In-wall-SA250 Mk2
Opis
The SA250 Mk2 subwoofer amplifier is specifically designed for use with the Custom Installation Series In-wall subwoofers, the ISW-3 and ISW-4. Deceptively slim at 3.5inches, and weighing 11.9lb, it provides 250 Watts of power.
The SA250 Mk2's equalisation is custom tailored to the In-wall subwoofers, with a two position EQ switch to select between the ISW-3 and ISW-4.
| Description | 1000W rack-mount amplifier with built-in subwoofer equalisation | |
| Front panel | Rotary volume (line in) | |
| Rotary low-pass filter frequency (4th-order Linkwitz, 40Hz - 140Hz) | ||
| Low-pass filter defeat 2-posn switch | ||
| Phase 0o/180o 2-position switch | ||
| Bass extension 3-position switch | ||
| Movie/music EQ 2-position switch | ||
| On/auto/s | ||
| Rear panel | Model select 2-position switch (ISW-3/ISW-4) | |
| Amplifier inputs | 2x RCA Phono socket, line in | |
| 2x RCA Phono socket, link out | ||
| 1x XLR socket, line in | ||
| 1x XLR socket, link out | ||
| 3.5mm jack - 12V trigger on/standby (overrides manual standby setting) | ||
| 3.5mm jack - 12V trigger equalisation movie/music | ||
| Amplifier outputs | 1x Neutrik® Speakon® 4-pole speaker socket | |
| 2x pairs of Binding Posts | ||
| Amplifier power output | 250W | |
| Input impedance | 33kΩ | |
| Signal / noise | >80dB | |
| Rated power consumption | 95W – 1/8 full power | |
| 30W – Idling | ||
| <1W - Standby | ||
| Height | 100mm (3.9 in) [88.5mm (3.5 in) plus feet] | |
| Width | 430mm (16.9 in) | |
| Depth | 322mm (12.7 in) | |
| Front panel height | 2U 88.1mm (3.5 in) | |
| Net weight | 5.4kg (11.9 lb) | |
| Finish | Black |